Roofing & Siding in North Georgia
The envelope is the cheapest part of the house to maintain and the most expensive to neglect.
Roofing and siding are the barrier between everything you've invested inside and the weather. Most of what determines their lifespan is detail work at penetrations, edges, and transitions.
Licensed & insured · Based in Dallas, Georgia
Leaks rarely start in the field of a roof. They start at flashing, valleys, penetrations, and where the roof meets a wall. Siding fails at the same kinds of transitions. Replacing the surface without correcting those details reproduces the failure on a new schedule.
- Missing, curling, or granule-shedding shingles
- Stains on ceilings or in the attic
- Daylight visible in the attic at the roof deck
- Soft, cracked, or separating siding
- Peeling paint concentrated on one elevation
- Wood rot at trim, corners, or the base of siding
- Visible gaps at flashing or penetrations
What changes when it's done right
- Water shed correctly at every transition and penetration
- Ventilation appropriate for the roof assembly
- Rot corrected rather than covered
- Exterior that holds finish because the substrate is sound
Your options
Roof replacement
Tear-off, deck inspection and repair, new underlayment, flashing, and roofing.
Targeted repair
Correcting specific failures where the overall roof has remaining service life.
Siding replacement
Removing existing siding, correcting substrate and rot, and installing new material with proper flashing.
Trim and rot repair
Replacing failed trim, fascia, and soffit before it spreads into framing.
Gutters and drainage integration
Sizing and placing gutters and discharge so roof water leaves the structure properly.
What drives the cost
We don't publish prices, because a number without a scope isn't information. These are the variables that decide yours.
- Roof pitch, height, and complexity
- Number of penetrations, valleys, and wall transitions
- Decking or sheathing repair discovered at tear-off
- Material selected
- Extent of rot found behind existing siding
- Access and staging requirements
What drives the timeline
Most delays are decided before demolition, not during construction.
- Weather windows for dry-in
- Material availability for the selected product
- Extent of substrate repair discovered once material is removed
Mistakes we help homeowners avoid
- 01Roofing over existing layers to save cost
- 02Reusing flashing at wall transitions
- 03Installing siding without a proper water-resistive barrier and flashing
- 04Painting over rot rather than replacing it
- 05Gutters that discharge directly at the foundation
How the project runs
A direct conversation about what isn't working, what you want to change, and what outcome matters most. No measuring tape yet — we start with the objective.
We walk the property and look at the conditions that actually drive cost: structure, water, access, existing systems, and what previous work left behind.
We define the work in writing — what's included, what isn't, and the decisions that still need to be made. This is where most estimate confusion gets eliminated.
A written, itemized proposal you can compare line by line against any other bid, with allowances stated instead of hidden.
Read this first instead
The recurring checks that keep maintenance from turning into construction.
The symptoms homeowners routinely explain away, and what they usually mean.
A practical framework for selections that hold up to how your household actually lives.
Roofing & Siding questions
It depends on the age of the assembly, how localized the failure is, and what we find at the deck. We'll show you what we find before recommending the larger scope.
Start with a conversation about what isn't working.
Tell us the problem in your own words. We'll walk the site, define the scope in writing, and price the work you actually approved.
Serving homeowners across North Georgia, including Dallas, Acworth, Kennesaw, Cartersville, Marietta, Woodstock, Canton, and surrounding communities.